Shanghai Jindun special vehicle Equipment Co., Ltd
Shanghai Jindun Special Vehicle Equipment Co., Ltd. Fire fighting trucks & equipment
Add to Cart
Vehicle
| Overall Size | (L × W × H) 9900×2500×3450mm(approx.) |
| Tire | 10.00-20-16PR |
| Maximum speed | 105km/h |
| Wheelbase: 6350mm | 6350mm |
| Full load | 26,000kg |
Chassis
| Model | FVM23S |
| Driving Model | 6 × 2 |
| Driving Mode | Right Hand |
| Engine Model | ISUZU |
| Fuel | Diesel |
| Discharge standard | Euro III |
| Engine Power | 270HP |
Cabin
IZUSU standard Safety Cab.
Water and foam tank
| Water tank | 7,000L |
| foam tank | 750 L |
| Material: | Tank material: 304 stainless steel, bottom thickness: 4 mm, wall thickness |
| Equipment | 1 No. overflow device |
| 1 No. level indicators | |
| 2 No. discharge outlet, with ball valves, to discharge from the side of the vehicle. | |
| 2 No. injection inlets, mounted beneath both two sides of the vehicle, through the top of the vehicle to inject water down. | |
| 1 No. foam outlet |
Fire Pump
| Manufacturer | America W.S.Darley & Co.,Ltd. |
| Model | KSP1000 single stage |
| Flow rate | 60L/s |
| Pressure | 1.0Mpa |
| Installation | rear mounted |
Fire monitor
| Model | PLKD48 electronic monitor PLKD |
| Location | Top of tank |
| Jet monitor Rotation angle | 348° |
| Spry nozzle elevation | ≤90° |
| Spry nozzle depression angle | ≤-15° |
| Work pressure | ≤1.0 Mpa |
| Flow rate | 48L/S. |
| Throw range | water: ≥60 foam: ≥55 |
Powder tank: 250kg
Work pressure: 1.4MPa
The tank is a pressure vessel, with feeding powder inlet, discharge outlet, nitrogen pipeline and discharge pipe. There are annular nitrogen pipes with intake valve inside tank, so the gas mixed with the dry powder symmetrically, to be fluidized state.The intake valve is designed to keep the powder away from the nitrogen pipeline.
Nitrogen cylinder group
Cylinder Number: 1 pcs
Cylinder capacity: 90L/pcs
Charge pressure: 15MPa
Model: JDX5260GXFGP90 Foam/Powder Fire-Fighting Truck
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. Q: What's the delivery time?
A: 1) 20 days delivery upon receipt of advance deposit if we have ready in stock for normal standard model.
2) ISUZU & Chinese brand chassis 3 months upon receipt of advance deposit.
3) European brand chassis 9 months upon receipt of advance deposit.
Any other questions, please do not hesitate to contact with us.